Vibration Measurement Recording & Analysis System
MRA-06X (6ch type)
MRA-03X (3ch type)
The MRA-06/03X is a handy type microvibration measurement/analysis system that records the signal from the microvibration measuring instrument on a computer and is able to perform high-performance monitoring, recording, analysis and output of vibration waveforms. The microvibration measuring instrument MMI-06X is an ultra-compact microvibration low noise multi-channel vibrometer that incorporates our extensive knowledge and experience with microvibration measurement. The real-time recording and analysis system RS1 is a new data logger that comes equipped with an FFT analyzer function on a laptop computer that is not only convenient to carry, but is also equipped with a display function that allows for convenient microvibration measurement.
System Configuration
FFT Data Logger RS1
- Recording/analysis software: RS1 Software
- PC interface: USB BNC box
Micro Vibration Measuring Instrument MMI-06X
- Vibration meter: OSP-06
- Servo type acceleration sensor: MG-102S
- Cable: Sensor Cable BNC Cable
Hardware Configuration
Vibration Meter
| Measurement Range | Unit | |
|---|---|---|
| Acceleration (ACC) | 0.1～400Hz | 60dB=1cm/s2(1Gal)／V |
| Speed (VEL) | 0.4～100Hz | 60dB=1mm/s／V |
| Displacement (DISP) | 0.5～100Hz | 60dB=0.1mm／V |
| Low pass filter | 50, 100, 200, 400Hz switching (-12dB/oct) | |
| Maximum output | ±10V | |
| Power supply | POWER-AC input 85-265V AC | |
| External dimensions (W x D x H) | 335×275×60mm | |
| Weight | 4.5kg | |
Servo type accelerometer (MG-102S)
| Measurement range | ±20m/s2(2000Gal) |
|---|---|
| Resolution | 1×10-6m/s2 |
| External dimensions (W x D x H) | 40×40×55.5mm |
| Weight | 190g |
BNC box
| Analog input | BNC×10ch(max16ch) |
|---|---|
| Power input | 5V DC(max1A) |
| External dimensions (W x D x H) | 307×264×50mm |
Features
- Handy type (weighing/small size) compact body
- 10 measurement channels
- Acceleration, speed, displacement output switching
- Low-pass filter 4-step switching
- Simultaneous output of acceleration, velocity, and displacement with a tripartite display system
- DC power supply, AC power supply compatible
Group Data Analysis
- FFT analysis is performed for each recording group.
- Data within a group can be displayed simultaneously as a waveform and a spectrum.
- It is possible to switch between individual display and overwriting display (tripatite display).
Simultaneous Data Recording and Analysis
- Transfer characteristics analysis of two items of data recorded at the same time can be performed.
- The transfer characteristics (transfer function, phase, coherence) can be displayed.
- When peak hold is selected, only the waveform and spectrum are displayed.
3D Analysis (Option)
- You can run the recorded data> perform spectrum analysis.
- You can rotate the 3D graph.
- The graph image can be enlarged or reduced.
